http://redan.pl/wp-content/uploads/okna-pcv.jpg

Aluminium joinery

We offer a variety of
modern and functional
Curtain systems

balustrady_balkonowe

See where you can find our products

Meet the full a list of stores with our products

in your area

See our stores

Stainless steel balustrade is a product of very high quality, which will provide life for years.

Stainless steel balustrade in combination with other materials to form a unique atmosphere: together with wood add a touch of warmth and elegance, with glass are the epitome of modern architecture.

In our offer you will find a full range of balcony railings:

  • railing stainless steel easy
  • railing of stainless steel bent
  • stainless steel railings with glass
  • railing self-supporting glass
  • railing system

balustrady_balkonowe balustrady_balkonowe

balustrady_balkonowe

OLYMPUS DIGITAL CAMERA

izolowane

See where you can find our products

Meet the full a list of stores with our products

in your area

See our stores

REDAN GARDENS OF THE THERMALLY INSULATED

Winter gardens are made of aluminium profiles thermally insulated. Spacer made of plastic, placed in a profile cross section, eliminates the possibility of freezing construction. The construction of the winter garden with non-insulated profiles without thermal break, is a common mistake made by artists, it has a major impact on the operation of the garden. In winter, during large temperature differences, on the inner surface of the profiles condense moisture from the room and there is frost. For demanding clients we also provide profiles filled with polyurethane foam, which are characterized by low heat transfer coefficient. It is also advisable to use safety glazing, sunglasses to prevent excessive heating and example especially in the glass roof. The side walls can be built sites, n doors as well as very functional sliding doors and bellows.

nieizolowane

See where you can find our products

Meet the full a list of stores with our products

in your area

See our stores

REDAN GARDENS, NON-INSULATED THERMALLY

Aluminium profiles without thermal break can be used to build terraced roofs and garage side elements without light. You can also use the non-insulated side elements, a winter garden, unheated, that can be used seasonally as a shield from the wind. The advantage may be in this case, the lower the price. Non-insulated sliding door systems and folding the pleated strainer can also be used as internal partitions in residential homes, offices, shops and factories.

mb-sr50n

Save to

Save to

Save to

Save to

Save to

Save to

Save to

See where you can find our products

Meet the full a list of stores with our products

in your area

See our stores

Façade system Mb-SR50N

System and beam-SR50N-dead-bolt is designed to build and perform light curtain walls hanging type and filling and roofs, skylights and other spatial structures. In accordance with current trends in architecture allows you to zlicowanie profiles poles and transoms on the inner face of the façade and the various versions of external appearance. This system is also the basis for the version with increased thermal insulation MB-SR50N HI + and fire solutions, it is also associated with structures all sorts of Windows: odchylno-wysuwnych, połaciowych and integrated with. Thanks to the variety of solutions based on the façade of the MB-SR50N architects and designers can implement even the most daring ideas regarding the construction of aluminum-glass.

Data technical details

  • posts about the depth: from 50 to 325 mm
  • bolts with a depth: from 5 to 189.5 mm
  • high thermal insulation: Uf from 0.94 W/(m ²)
  • glazing thickness: 24 mm to 56 mm
  • Air permeability: AE 1050, EN 12152
  • water resistance: RE 1200, EN 12154
  • impact resistance: I5/E5, EN 14019

The design of the

  • the angular connection to the free formation of aluminium construction
  • pillars and girders "sharp" edges to build supporting structures of curtain walls with the appearance of a single truss
  • variations of the aesthetic of the façade and a range of transparent profiles of various shapes provide many variants of the image of the façade
  • a wide range of items opened in the façade: various types of Windows and doors, including połaciowe window, the window integrated into the façade, as well as Windows, folding and opened parallel MB-SR50N OW
  • a large range of glazing and isolators and accessories allow you to get a high level of thermal insulation of facades
  • the possibility of bending of profiles and ARC construction

mb-sr50n-hi

Save to

Save to

Save to

Save to

Save to

Save to

Save to

See where you can find our products

Meet the full a list of stores with our products

in your area

See our stores

Façade system Mb-SR50N HI

MB systems-SR50N HI, are intended to build and perform light curtain walls hanging type and filling and roofs, skylights and other spatial structures. In accordance with current trends in architecture allows you to zlicowanie profiles poles and transoms on the inner face of the façade and the various versions of external appearance. This system is also the basis for solutions.

Mb-SR50N HI +

Version of the best parameters of thermal and acoustic insulation, which uses a modified version of an insulator of a material. The shape of the insulator in addition to high protection against the penetration of heat also provides appropriate keeping screws pressure strips, which is important during Assembly of the façade. New accessories in this system gives greater freedom of choice.

Data technical details

  • posts about the depth: from 50 to 325 mm
  • bolts with a depth: from 5 to 189.5 mm
  • high thermal insulation: Uf from 0.7 W/(m ²)
  • glazing thickness: 24 mm to 56 mm
  • Air permeability: AE 1050, EN 12152
  • water resistance: RE 1200, EN 12154
  • impact resistance: I5/E5, EN 14019

The design of the

  • System MB-SR50N HI + is certified Institute of PHI Darmstadt in the top flight and + what is a confirmation that made it constructs can be used in the passive construction
  • the angular connection to the free formation of aluminium construction
  • pillars and girders "sharp" edges to build supporting structures of curtain walls with the appearance of a single truss
  • variations of the aesthetic of the façade and a range of transparent profiles of various shapes provide many variants of the image of the façade
  • a wide range of items opened in the façade: various types of Windows and doors, including połaciowe window, the window integrated into the façade, as well as Windows, folding and opened parallel MB-SR50N OW
  • a large range of glazing and isolators and accessories allow you to get a high level of thermal insulation of facades
  • the possibility of bending of profiles and ARC construction

mb-sr50n-efekt

Save to

Save to

Save to

Save to

Save to

Save to

Save to

See where you can find our products

Meet the full a list of stores with our products

in your area

See our stores

Façade system Mb-SR50N The EFFECT of

System MB-SR50N EFFECT It is intended to construct and perform light curtain walls hanging type and filling and roofs, skylights and other spatial structures. Thanks to a special system of glass to the poles and transoms, from the outside you get a smooth glass wall divided structure of vertical and horizontal lines the width of 20 mm. The façade made in this system provides outstanding performance, and with the possibility of applying fills with glass-allows to obtain very high thermal insulation.

Data technical details

  • Air permeability: AE 1200 Pa
  • water resistance class RE 1200 Pa
  • resistance to impact the wind: up to 2400 Pa
  • impact resistance class I5/E5
  • glazing thickness: 24 mm to 56 mm
  • load profiles to 450 kg.

The design of the

The glass in the system MB-SR50N EFFECT are glued together using a special adhesive silicone design that protects the glass from breaking and rozszczelnieniem connection, which in turn could lead to detachment of aluminium construction fill. Bonding takes place under strict control in the serial process which allows to guarantee the correctness of the connections. Around the perimeter of the glass are special elements for installation of grub screws screwed plates to the mullions and transoms. It is possible to execute the construction of the wall geometry, for example. the Rotunda of the pressure plate angle, individually designed under specific solution. Due to the strength of the fracture, the danger of glass under the influence of the temperature and safety of the users it is recommended to use hardened glass or thermal loading.

For the sake of appropriate performance wall sealed from the outside is a special insulating rope PE (PP) and silicone weather to ensure full tightness of rain water, air and providing excellent thermal insulation of the façade.

ei-300

Save to

Save to

Save to

Save to

Save to

Save to

Save to

See where you can find our products

Meet the full a list of stores with our products

in your area

See our stores

Façade system Mb-SR50N EI 300

Mullion and transom wall system-transom MB-offices consist of EI is to construct and perform light curtain walls and filling fire-fighting in a class EI30, EI45, EI15 fire resistance, EI60 according to standards PN-EN 1364-3 and PN-EN 1364-1 and the glass cover with a roof in fire resistance class Replaced according to PN-EN 1365-2. The system is classified as a fire retardant (NRO).

Data technical details

  • columns with a depth: from 85 to 225 mm
  • bolts with a depth: from 85 to 189.5 mm
  • high thermal insulation: Uf from 1.9 W/(m ²)
  • glazing: from 15 mm to 52 mm
  • Air permeability: AE, PN-EN 12152
  • water resistance: RE 1200, PN-EN 12154
  • fire resistance: EI15, EI30, EI45, EI60, EN 13501-2

The design of the

System design is based on a bearing frame structure with vertical (columns) and horizontal (girders) box-section aluminium profiles and the characteristic width of 50 mm.

Profiles of mullions and transoms are appropriately combined to create design grate aluminum, which is fastened to the building structure by brackets. In order to obtain the fire resistance of aluminium profiles, columns and girders were equipped with special fire-retardant inserts. The contribution of ogniochronny consists of, with aluminium shape shaped role, flame retardant materials plates lined. The system provides transparent connection bolt with beam, which allows the efficient drainage and ventilation area vailable.

In order to achieve optimum thermal and acoustic insulation, continuous heat added (insulator), made from material HPVC and profiled sealing beads from EPDM. Glass fire-retardant or other fill are embedded in the wrębach glazing designed of mullions and transoms, and side. In addition, EC wrębach glazing mullions and transoms used was ogniochronna. Pressure Strip is fitted to the load-bearing profiles through the screw and washer in stainless steel.

This system prevents fire glass glazing or other filling from falling out of the frame during the fire.

Redan VISOFOLD

See where you can find our products

Meet the full a list of stores with our products

in your area

See our stores

Redan VISOFOLD

This system is intended for the construction of the folding-folding.

Description

A system of three Chambers, thermally insulated. Two possible solutions skirts: version 1 – as a continuation of the frame used on the sides and on the top (the advantage of this solution is a very good seal). Version 2-low threshold zatapiany in floor, sealed the two seals szczotkowymi. In both cases, the threshold moves the cart (folding wings Guide), which is the weight of the moving structure. It is possible to use from 2 to 8 and more wings moving, zsuwających symmetrically on both sides, or in its entirety on one of the parties. After extended wings can be such as podbanske, inside and outside the room. Installation depth 70/78 mm for frames and wings. Possible thickness fills it from 4 to 37 mm.

mb-shutters

See where you can find our products

Meet the full a list of stores with our products

in your area

See our stores

Shutters MB-SUNSHADES

Shutters provide excellent protection against too strong sunlight of the premises, and their application gives the façade a distinctive appearance. The design consists of a frame filled with obliquely arranged lamellas or panels. Thanks to the fact that its elements are made of aluminum are very resistant to weather conditions and for many years do not require any restoration, which distinguishes them from design constructed from PVC or wood. Frame profiles are slim and light, however, have adequate stiffness, which allows you to perform both screens on the Windows and patio doors. Aluprof shutters MB-SUNSHADES for people looking for practical solutions, while at the same time. It can be colour-matched to the elevation or to the Windows, you can also use them as accents on the background of the façade.

Due to the possibilities afforded by the technique of performing dekoracyjnoochronnych coating aluminum shutters MB-SUNSHADES ideal for use in various types of construction: in buildings with traditional building very well look like wood-texture structures will, in modern homes optimal color may be a combination of structures with soft colours, identical with Windows, especially impressive when the window joinery and door is made of aluminium.

The advantages of the system

  • Shutters MB-SUNSHADES it a unique visual effect and effective sun protection.
  • Rich design and colors, all the colors are available with special coatings RAL ATEC and a full range of wood colours from the palette by ADEC.
  • Two variants of the structure fills: cellular structure or fixed panel.
  • Fixing by means of a hinge that allows you to assemble in front of the façade, with her zlicowane, or inside the window opening.

The properties of the the system

  • Lightweight and durable construction okiennicy, in which you can apply as a fill both aluminium lamellas and Panel disc with the possibility of additional strengthening using a steel rod.
  • The maximum dimensions of the shutters 1.2 x 2.5 m allow you to use them not only in the standard window openings but also in larger for example. door.
  • Available in the hinges allow you to apply different solutions closed shutters: they can be made before the façade, flush it or placed deeper into its slot door.

Redan Visoglide

See where you can find our products

Meet the full a list of stores with our products

in your area

See our stores

Redan VISOGLIDE

thermally insulated sliding door system. All profiles of this system are trójkomorowe. The width of the door frame, width 155 mm or 99 mm wings: 43 mm. Apply two-and trójtorowych contact Rails, after which the moving wing, allowing you to open a significant space. The placement of below moveable eliminates the danger of obwieszania the door. The possibility of application of fillings from 4 mm. Possible combinations of two, three, four, and two-or frame-based sześcioelementowe trójtorowej.

The subsystem REDAN HS VISOGLIDE

a variant of the sliding door system with the ability to use hardware-has been raised. The height of the wing is so chosen, to fit inside a mechanism for getting the most popular hardware it was argued.

REDAN VISOGLIDE LIGHT

Profiles of the subsystem have the same design as the VISOGLIDE REDAN, but are devoid of thermal break. Ply is replaced with aluminium, ekstrudowaną, pressed the wall.

Redan SUPERGLIDE

See where you can find our products

Meet the full a list of stores with our products

in your area

See our stores

Redan SUPERGLIDE

thermally insulated sliding door system. All profiles of this system are trójkomorowe. The depth of the door frame 116 mm (2) or 181 mm (3), the depth of the wing 51 mm. As a side szklące popular strips is applied on the door window. There is a possibility of flooding the frame in layers of the floor, so as to avoid the emergence of an artificial threshold. Application of two-and trójtorowych contact Rails, after which the moving wing, allowing you to open a significant space. The placement of below moveable eliminates the danger of obwieszania the door. The possible combinations of two, three, four, and two-or frame-based sześcioelementowe trójtorowej.

Redan MONORAIL

a subgroup of high thermal insulation SUPERGLIDE REDAN system. Conformation frame sliding doors, which can be directly fastened to fill, positively affects the economy. In the traditional sliding systems Aliplast, solid parts sliding Windows are made of wings and fixed permanently. The advantage is the ability to use common to other cable systems szklących and seals.

Drzwi przesuwne

See where you can find our products

Meet the full a list of stores with our products

in your area

See our stores

Systems sliding

Sliding door systems for performing aesthetic, and convenient for users and giving the possibility of very efficient use of space in the building. In many cases, these designs are based on window and door systems, door series MB. The range of available solutions and potential applications is wide: from products suitable for building balconies, terraces or conservatories after constructs wonder in public buildings and commercial.

These systems are designed to perform the sliding Windows and doors with thermal insulation that you can build in masonry walls, aluminum facades, winter gardens or built-in Web made from elements of the systems MB-59S or MB-59S Casement. Sliding doors, especially with large dimensions, visually ' enlarge ' living surface by combining it with an external terrace or garden.

ZABUDOWA

See where you can find our products

Meet the full a list of stores with our products

in your area

See our stores

Installation of balcony in the framework programme

One of the great ways to extend the season are light Windows and sliding doors on the framework programme, which are part of any design and shape of the roof, arcades, verandas. Sliding Windows allow you to fully open or close the terrace depending on the current direction of the wind or sunlight.

The framework has the ability to use different fills the thickness of 4 mm to 18 mm, allowing you to fit built-in to user expectations. Recommended, a good solution is to use a sliding aluminum or solid in the glazing 16 mm, which lowers noise and impact positively on the energy balance of the whole obudowanego terrace and adjacent building. Delicate frame wall terrace with large glazing allows you to enjoy the view from the outside, without any experience closing and any dividing line a terrace with a garden.

Thanks to our production, from the terrace you can enjoy until late autumn and in winter, keep on the favorite plants to create a kind of a winter garden. Offered designs are made from the highest quality aluminium and safety glass: laminated or tempered and have appropriate authorisation for use in construction, and the installation is executed directly by the manufacturer or by authorized representatives. Several years experience of our company in the production of systems building balconies and terraces ensures durability and reliability framework systems for your comfort and satisfaction.

Framework for building balconies

Sliding systems are. Window frames are made of aluminium profiles that allow you to apply different kinds of glass. The window, move the two parties and through the use of special bearings this is extremely easy. Special springs make it that none of the Windows will not open by itself under the influence of wind or by unauthorized persons. This is also extra security at a time when the balcony use children. Framework for building the balconies are running well insulating from the rain and wind but not without the possibility of ventilation. Harmonise perfectly systems with our aluminium banisters.

Examples of framework

Zabudowa balkonu Zabudowa balkonu Zabudowa balkonu Zabudowa balkonu

2

See where you can find our products

Meet the full a list of stores with our products

in your area

See our stores

Terrace is a place of rest for the whole family

Entirely glass superstructure terrace allows free and comfortable, unfettered admiration of nature. Glass panels ensure freedom of configuration, allowing for a full or partial opening of the terrace at any time. The innovative design along with the unique functionality of the glass in the Windows bezramowym makes each House looks luxurious and modernand its residents can enjoy a unique comfort.

Installation of balcony on bezramowym

Frameless buildings are modern buildings-based systems with aluminium and tempered glass. Tempered glass is very resistant to weather conditions and by the break does not pose a threat to pedestrians. Bezramowy balcony system allows such arrangement of Windows that they form a completely transparent and uniform plane. However, in the warm and sunny days allow the submission of all glass panels in a single package, thus facilitating the free flow of air. Construction the balcony running bezramowym is its practical cover without interfering with the architecture of the building. Its form is suitable for higher standard of use and very modern and aesthetic appearance.

Apply a built-in balcony

In the multifamily apartment blocks balcony is more and more appreciated and desired by the locals. Adequately arranged allows you to unwind and relax outdoors without leaving the apartment. Building the terrace and the balcony is from year to year more and more interest. Contributes to the comfort of being in this room. Installation of balconies, in fact, protect against the adverse weather conditions, as well as unwanted eyes. Building terraces and balconies also affect the maintenance of a constant level of temperature in houses and flats, because they protect against heat loss. Offered by us the framework and frameless construction the balcony also raises aesthetic level of the façade. Stylish, modern and transparent perfectly fit into the current architectural trends. Frame and frameless built-in balconies are characterized by ease of use and quick Assembly, and rugged construction provides an excellent barrier plates.

Examples of system bezramowego

2222222222

copal

See where you can find our products

Meet the full a list of stores with our products

in your area

See our stores

Redan COPAL SYSTEM

modern sliding glass walls and Windows and aluminum for the construction of the outer curtain construction such as installation of balconies, loggias, terraces, verandas, canopies and for use indoors: sliding doors, partitions, Windows mail, walkin closets.

As part of form

Sliding segments

With the light system of sliding doors and Windows shall be m.in: installation of balconies, terraces and verandas; doors and sliding wall in the Interior; Mail pane (sliding horizontally and vertically), the body of the dressing rooms and alcoves. High rigidity profiles allows you to build the elements, even exceeding 3 m in height.

The walls, structures and canopies

A wide range of profiles with different levels of strength allows for the construction of load-bearing structures (roof and walls) with varied span. COPAL system allows you to build both internal and external wall light by any project.

Windows fixed and tilting

Windows fixed and tilting can be successfully mounted in a previously prepared construction. They can be used on both the outside and inside spaces, are the new solution by docieplaniu hal. The design of the system allows you to use fills with a thickness of 4 to 18 mm. single glazing and composite, particle boards.

Redan Aliver

See where you can find our products

Meet the full a list of stores with our products

in your area

See our stores

The roof of the family

ALIVER REDAN systems

provide the required thermal insulation thanks to the thermal break design. Apply intermediate rafters the rafters and extreme, which allow the smoothly combining the vertical walls (without the possibility of przemarzania). Articulated connection in the eaves and Ridge allows you to continuously adjust the angle of inclination of the roof (within the limits of 5 °-45 °). Given the span load-bearing elements are approximate, depend on the spacing of the rafters and wind load zones and snow. There is the possibility of reinforcing the rafters and eaves wsuwanymi inside the relevant profiles aluminum or steel. Also designed an efficient drainage system rainwater from the roof. Apply okapowe profiles with or without gutter gutter. Systems for Roofings REDAN ALIVER are suitable for fillings made of polycarbonate, and multifunctionality. Roofing solutions system winter gardens reduce to a minimum the use of flashings. There are several types of masking strips: simple, rounded, and renovation. It is possible to install both on and under the gutters, profiles and ornamentowych (decorative Combs, ściągi, housing drain pipes).

REDAN ALIVER 100

This is the easiest pool roofing system. System without thermal insulation. Used kind of rafters-profile in the shape of inverted "T" carrier/element above. It is possible to fill it: Polycarbonate or glass glazing single.

REDAN ALIVER 400

It enveloped system allows you to design complex shapes, custom glazed roofings. In this system, the static roof is placed on the outside. over fill. Thus, a smooth, inner slab plane visible inside the garden. It is possible to use different angles of inclination in one slab ceiling.

REDAN ALIVER 600

is enveloped with nieprzeziernymi panels with a thickness of 55 mm.

REDAN ALIVER 1000

canopies of Mono-and dwuspadowe, thermally insulated. Rafter 73 mm (and renowacyjna). Bandwidth of the rafters to 2 m (glass) or 2.5 m (polycarbonate). Rafter supported on integrated chute okapowym profile and hinged kalenicowym profile. Seizure of the rafters on the straight flush.

REDAN ALIVER 2000 +

canopies of Mono-and dwuspadowe, thermally insulated. Rafter 105 or 125 mm (normal or renowacyjna). Rafter span: up to 2.5 m (glass) and 3 m (polycarbonate) for 105 mm rafters 3.2 m (glass) and 3.8 m (polycarbonate) for 125 mm okapowe Profiles of the rafters and Crest are specially profiled ledge, on which are based the jammed angle rafters.

REDAN ALIVER 5000 +

canopies of Mono-and dwuspadowe, thermally insulated. Rafter 150 mm (normal or renowacyjna). Bandwidth of the rafters to 3.6 m (glass) or 4.4 m (polycarbonate). The possibility of strengthening the eaves typical of steel profiles, which allows for installation in vertical sliding construction walls or the folding of large dimensions.

REDAN ALIVER 6000

roof insulated roofs with complex shapes. Bearing part of the rafters (can) placed on the outside of the roof (above) is a solution to get a flat, the inner surface of the roof. The possibility of connecting lines inclined at different angles, the ability to collapse the rafters. Applied thermal ply Chamber is a good insulating properties. The possibility of using different angles of inclination in the different areas of the roof.

  • Narożnik Aliver 100
    Aliver corner 100
  • Narożnik Aliver 600
    Corner Aliver 600
  • Narożnik Aliver 2000
    Corner Aliver 1000
  • Narożnik Aliver 1000
    Corner Aliver 2000
  • Narożnik Aliver 5000
    Corner Aliver 5000

Redan Victorian Plus

See where you can find our products

Meet the full a list of stores with our products

in your area

See our stores

REDAN VICTORIAN PLUS

It enveloped Roofings system winter gardens of complex shapes.

Description

Mount the rafters in eaves and Ridge using articulated hinge fittings. Corner connection system are different angles: the concave and convex. Keystones of the rafters, beams basket. The rafters of different heights which give the possibility of obtaining spread from 1.8 to 4.5 m. Occurs separate gutter (attached to the profile okapowego using hangers suitable drop) and a separate profile hanging. Gutter and profile connectors have a lawn: the most common angles of refraction is 90, 135 and 150. For typical angles there are systemic keystones or places where focuses many of the rafters. It is possible to install both on and under the gutters-profiles and ornamentowych elements (ornamental Combs, ściągi, housing drain pipes).